Step Down modul LM2596 CC/CV

29.00 DKK incl. moms

Step Down modul LM2596 CC/CV

På lager

Varenummer (SKU): A7-5 Varekategori:

Beskrivelse

CC (Constant Current) og CV (Constant Voltage) modul. Kan anvendes som ladekredsløb til genopladelige batterier, eller som faststrøms driver til højeffekt LED’s.

Input: DC 3V-40v (Indgangsspænding skal være minimum 1,5V højere end udgangsspændingen)
Output: justerbar imellem 1.5V til 35V, max 3A

Typical Application:

Using as LED constant current driver:

a) Make sure operating current and Max operating Voltage of the LED you need to drive.
b) Adjust the constant voltage potentiometer to make sure the output Voltage is up to LED Max operating Voltage.
c) Use the multi meter in 10A current scale to measure output short-circuit current and adjust the current potentiometer to make sure the output current to the expected LED operating current.
d) Connect LED then test again with above sequent (1,2,3,4 steps to connect the power module input and output load does not take LED.)

Using as battery charger:

a) Make sure of the voltage and current of the battery you need to charge.
b) Adjust the constant voltage potentiometer to make the output voltage same to the charge voltage
c) Use the multi-meter in 10A current scale to measure output short-circuit current, and adjust the current potentiometer to make sure the output current to the expected charging current value.
d) Charge transfer lamp current default value is 0.1 times of the charging current(constant current value)
For lamp current adjustment, please turn potentiometer adjustment;
e) Connect battery and trying charge up.
(1,2,3,4 steps to connect the power module input and output load does not take batteries.)

Yderligere information

Vægt10 g

Anmeldelser

Der er endnu ikke nogle anmeldelser.

Kun kunder, der er logget ind og har købt denne vare, kan skrive en anmeldelse.